Sunday, June 20, 2010

32.768 KHz oscillator using a watch crystal


Below are a couple circuits you can use to produce a 32.768 KHz square wave from a common watch crystal. The output can be fed to a 15 stage binary counter to obtain a 1 second square wave. The circuit on the left using the 4069 inverter is recommended over the transistor circuit and produces a better waveform. The single transistor circuit produces more of a ramping waveform but the output swings the full supply voltage range so it will easily drive the input to a CMOS binary counter.





http://www.bowdenshobbycircuits.info

2 comments:

  1. Regarding the transistor circuit, there is a mistake, the 3M3 resistor should be connected between transistor's base and collector.

    ReplyDelete
  2. Metaphysical subjects cover many different interests, making them appealing to a wide range of people. A metaphysical shop UK can offer an introduction to accessories associated with spiritual exploration.online witchcraft shop

    ReplyDelete